[TechAssist] Re: JVC-TV- AV2773-Part ID help
- From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 29 Oct 2001 13:01:21 -0800
Well Ray;
Barry may be a great tech, but in this case it's an attidude problem, when
someone goes on the list, and states, "the hell with everyone else", to me
that's either a bad choice of words, or an attidude.
We're here to help each other, by our previous experience, and that phrase
just doesn't fit.
As you can see in the Guideline suggestion, nothing pointed to him in
particular, but again the short fuse and attidude but him right back in
square one.
You may want to read the conversation thread and see what led to this.
-Ed-
teltek@xxxxxxxxxxx
TEL-TEK ELECTRONICS.
----- Original Message -----
From: "Ray Barry" <b3138@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, October 29, 2001 9:27 AM
Subject: [TechAssist] Re: JVC-TV- AV2773-Part ID help
>
> Hey guys, are we having a bad Monday morning? For cripes sake, cant we
> lighten up a little? I've seen plenty of much more irrelevant crap on
this
> (and other) lists that did not get such a heavy handed response. At least
> there were a few chuckles included. Dennis Viereck is one of the most
> knowlegable and helpful members of this list, and I for one cant see that
he
> said anything meriting such action. Lets save our anger for the disease
> spreading camel jockeys running around loose. Ray Barry
>
> ----- Original Message -----
> From: <info@xxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, October 29, 2001 9:51 AM
> Subject: [TechAssist] Re: JVC-TV- AV2773-Part ID help
>
>
> >
> > Rest assured, it's been done! We don't need unprofessionals
> > at this list.
> >
> > TechAssist Administration
> > http://tech-assist.org
> > techassist@xxxxxxxxxxxxx
> >
> >
> > ----- Original Message -----
> > From: "Dennis Viereck" <wa6ati@xxxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Monday, October 29, 2001 8:23 AM
> > Subject: [TechAssist] Re: JVC-TV- AV2773-Part ID help
> >
> >
> >
> > Then remove me!
> > Dennis Viereck
> >
> > info@xxxxxxxxxxxxxxx wrote:
> >
> > > All, We have guidelines here and those that will not
> > > follow them will be removed. Please do not post
> > > off topic posts.
> > >
> > > TechAssist Administration
> > > http://tech-assist.org
> > > techassist@xxxxxxxxxxxxx
> > >
> > > ----- Original Message -----
> > > From: "Dennis Viereck" <wa6ati@xxxxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Sunday, October 28, 2001 9:35 AM
> > > Subject: [TechAssist] Re: JVC-TV- AV2773-Part ID help
> > >
> > > Don't apologize. That is a sign of weakness! If you hadn't
> > > written it I
> > > would have. I thought it was funny. Don't let them turn you
> > > into a stuffed
> > > shirt. Keep that humor flowing. To hell with everyone
> > > else............
> > >
> > > Dennis
> > >
> > > "WPT19. P" wrote:
> > >
> > > > Only kidding my friend don't get mad, sorry if I offended
> > > you or
> > > > somebody else of this group, it wasn't my purpose, it's
> > > sunday we just
> > > > lived one hour twice, and I felt very happy after a long
> > > sleping night,
> > > > please get my apologize.
> > > >
> > > >
> > > > E-mail message
> > > >
> > > > Sender: techassist-bounce@xxxxxxxxxxxxx From:
> > > teltek@xxxxxxxxxxx
> > > > (Tel-Tek=A0Electronics) Date: Sun, Oct 28, 2001, 9:36am
> > To:
> > > > techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re:
> > JVC-TV-
> > > AV2773-Part
> > > > ID help Reply=A0to: techassist@xxxxxxxxxxxxx
> > > >
> > > > We may just have to put you on our "Smart Ass" mailing
> > > list. There's
> > > > already one there, just waiting for some one to converse
> > > with.
> > > > -Ed-
> > > > Tel-Tek Electronics
> > > > teltek@xxxxxxxxxxx
> > > > ----- Original Message -----
> > > > From: "WPT19. P" <wpt19@xxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Cc: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Sunday, October 28, 2001 8:00 AM
> > > > Subject: [TechAssist] Re: JVC-TV- AV2773-Part ID help
> > > > 75 volts are 75 units of pressure to make some current to
> > > flow in a
> > > > determined circuit.
> > > > the flow depends of the resister on the circuit. THE OHM
> > > LAW SAID 1 VOLT
> > > > APPLIED TO A RESISTOR OF 1 OHM
> > > > THE FLOW OF CURRENT WILL BE 1 AMP.
> > > > (hope this help to understand what 75 volts is)
> > > >
> > > >
> > > >
> > > >
> > > > Good luck,
> > > > pete
> > > >
> > > > Help make your TechAssist online repair tips
> > > > database better! Submit your fixes here:
> > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > To unsubscribe write to:
> > > > techassist-request@xxxxxxxxxxxxx
> > > > with unsubscribe in the subject line.
> > >
> > > Help make your TechAssist online repair tips
> > > database better! Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with unsubscribe in the subject line.
> > >
> > > Help make your TechAssist online repair tips
> > > database better! Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with unsubscribe in the subject line.
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
