[TechAssist] Re: JVC VCR VP690U
- From: "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 5 Jan 2003 10:17:15 -0500
Ed,
First thing I check is the voltage reg in power supply.
Also, older JVC's were notorious for their ICP's.
These are obviously marked on the PCB.
support@xxxxxxxxxxxxxxxxxx
FAX 717-564-4952
Jeff Dougherty
Intrepid Video & Electronics Be careful of your thoughts.
501 Luther Rd They may become your words
Harrisburg, PA 17111 any moment.
717-909-8844
VCR tips, electronics info & general interest.
www.intrepid-video.com www.tech-repair.net
www.thetoolcaddy.com www.9-11-2001tragedy.com
***********************************************************************
----- Original Message -----
From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, January 04, 2003 11:28 AM
Subject: [TechAssist] JVC VCR VP690U
Anyone have anything in their database for this VCR. Dead...No Display. Came
in with tape inside unit. Voltages seem to be there, but not sure since I
don't have the Manual.
TIA
-Ed-
Ed Gaidies
Tel-Tek Electronics
Ontario-Canada
teltek3@xxxxxxxxxxxx
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
