[TechAssist] Re: JVC VCR VP690U
- From: "teltek3" <teltek3@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 4 Jan 2003 17:59:19 -0500
Thanks Clint.
-Ed-
Tel-Tek Electronics
Ontario-Canada
"If Apple and Microsoft can talk...why can't the rest of the World?"
teltek2@xxxxxxxxxxxx
----- Original Message -----
From: <VideoVann@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, January 04, 2003 2:07 PM
Subject: [TechAssist] Re: JVC VCR VP690U
> Before you throw the towel in, my experience is that JVC is notorious for
> using solder-in, circuit protectors all over the place, even on the front
> panel board, power supply, etc....2 legged devices that are easy to find,
> easy to ohm out & easy to replace. Have replaced many. Clint Vanorsdell
DBA
> Video Van.
>
>
> In a message dated 1/4/03 1:05:42 PM Eastern Standard Time,
> teltek3@xxxxxxxxxxxx writes:
>
> > LeRoy;
> > Your right about the HR...but this display is dead to the world..no
> > flashing. I put it back together...before it starts costing me money.
> >
> > Thanks
> >
> > -Ed-
> >
>
>
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
