Is the 'clicker" the prot relay? Key measurement would be VDC @ each output ,if you can reach there.Otherwise find output before the relay and check DC level.Expect less than say 30 mV per channel. Pete D Trippel <dtrippel@xxxxxxxxxxx> wrote: Hello Everyone! I am working on a mx-d401 mini stereo . The audio outputs were blown. I replaced both outputs. I have +36 -36 vcc to both ic's and both ic's have audio at the imput. Relay clicks at turn on, but no output. Any help would be appreciated. Thanks Don Trippel Don's Elecronics Rosthern,Sask Canada ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ Peter Neal Neal Electronics 1905 E. Wm.Cannon Austin,TX 78756 ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/