[TechAssist] JVC GR-AXM300U wont eject.

  • From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx>
  • To: <Techassist@xxxxxxxxxxxxx>
  • Date: Thu, 7 Feb 2002 10:37:57 -0500

This 1998 model VHSC camcorder draws about 1/2 amp of current when the eject
button is pressed, but the loading motor never runs. After a few seconds of
this, the power shuts off. Have checked mode switch and gear alignment,
reseated ribbon cables.
Can run loading motor from external power to check for mechanical jamming.
Jerry Silverman
Greentron Inc
4 Newland Ave
Greenville SC 29609
864 232 3889
Fax 271 2080
mailto:greentron@xxxxxxx


------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts:

  • » [TechAssist] JVC GR-AXM300U wont eject.