[TechAssist] Re: JVC AV36020
- From: "Bob@Bobs tv" <woodman1@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 9 Mar 2004 11:29:56 -0500
Larry,
Unsolder micro and see if +5 returns, had a JVC AV32D202 that was
doing the same...
Hope this helps
Bob,
Bobs TV Worcester, ma
woodman1@xxxxxxxx
Main 508-853-1482
Fax 508-853-1480
----- Original Message -----
From: "Larry Poffen" <lpoffen@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, March 09, 2004 10:57 AM
Subject: [TechAssist] JVC AV36020
> Does anyone have a power supply troubleshooting chart for JVC? Have this
JVC
> AV36020 that was hit by a pwr surge. It was totally dead with just raw B+
> when it came in. I have replaced IC901 (STRF6626 & Q912 & now the power
> supply is partially working. I still get no 5V G+ to pin 51 of the micro.
> I sure need a troubleshooting procedure on this set or other similar JVC
> sets. Any help appreciated. Larry
>
> Larrys TV Service
> Broken Arrow OK 74011
> phone 918-455-1041
> Fax 918-451-4485
> e-mail lpoffen@xxxxxxx
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
