Bill:You might check this one. Thats all I have on that one. JVC AV32F703 A112 Dead Set Light comes on steady at plug in and then starts blinking Q951 Relay Driver (surface mount) Jerry Alpha 21 Electronics Granite City, IL 62040 618-452-8620 alpha21century1234@xxxxxxxxxxxxx Bill Grabowski <bgrabowski@xxxxxxxxx> wrote:This JVC has me stumped it had a vented capacitor C973 and poor solder on jumper W624 just like a couple of tips programs said to look for but it still shuts down after 5-6 seconds. The HV is at 29KV and I even changed the fly even after good ringing suspecting internal arcing. Would anyone have the schematics for this set in PDF. I'd really appreciate it. Thanks much!! Bill Grabowski -- ********************** Bill Grabowski Triangle Appliance 3813 Roosevelt Rd Kenosha WI 53142 262-694-6500 262-694-6523 fax bgrabowski@xxxxxxxxx ********************** ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/