Al, From Tech Repair CD: JVC\AV27D200\No start\\\\Q927 (C-E leaky -checks good)\\\\\\\\ Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Al Gutz" <alg@xxxxxxxxxxx> To: "tech assist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 23, 2004 11:16 PM Subject: [TechAssist] JVC AV32D200 Dead no stby supplies. Set is dead, when plugged in there are no standby supplies. No shorts in secondaries and have replaced C926?? Tried 2 different STRs, checked all parts in primary side of supply. When in stby there should be voltage from D910 on the E of Q911, this is to supply feedback voltage to SRT. If I cheat the thing on the set works perfect until I turn it off, then no standby voltages again. Anybody ever see this problem on this JVC, this is an odd PS for a JVC. Thanks for any info or good guesses. Al G Al's TV-Electronics Pembroke Ont. Canada ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/