Hi Ed, What do you mean by ragged? Do you mean the edges of the OSG are rough and not smooth? Is there a separate OSG IC, what is the part number? Sounds like some of the 'data' which make up the graphics are corrupt, may need a new graphics IC. Just my thoughts as I know nothing about this model. David Lessard Alexandria, Ontario, Canada Mr_fixit@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Tel-Tek Sent: Friday, May 13, 2005 3:30 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] JVC AV-27BP3 Has anyone had any problems with AV-27BP3 with ragged OSD. Picture is good...but when OSD is present...the OSD is ragged. I replaced IC201 in this for shut-down problems. That IC fixed that part. Thanks.. -Ed- -- Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx teltek@xxxxxxxxx ------------------------------------------------------------------------ ----- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/