Maybe someone has encountered this before, can help us with this? Customer said this set was hard to turn on , sometimes after a few tries , it would finally turn on. Before that, the color / convergence was off (bad). When I tried it, the relay would click but no video, audio, or h.v., but sometimes the power light would come on, then back off. I replaced capacitors on the converg. board, and on the main board - pwr. section. I don't know if the regulators are damaged or which reg. to check or change. If anyone can help with this, I will appreciate it very much? Thanks. David.. Robinson Electronics 1075 Sweeten Creek Road Asheville, NC 28803 Ph./Fax. 828 274-3787 www.robelect.com Mailto: RobinsonElectronics@xxxxxxxxxxx ***************************************************************************** The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.html Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/