[TechAssist] Re: Hitachi DVD/VCR
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 14 Feb 2004 14:19:34 -0500
Russ,
Contact Hitachi for free...
www.hitachiserviceusa.com
I'm sure they will help...
If this is model year 2003, look for a cracked mode slide...long plastic slide
on bottom of VCR deck.
Jeff Dougherty
Intrepid Video TV/VCR
263 S Front St
Steelton PA 17113
fax...717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, February 13, 2004 3:06 PM
Subject: [TechAssist] Hitachi DVD/VCR
I have a Hitachi DVD/VCR that is my personal unit.
Model DV-PF2U
Not long after I bought it the tuning quit and I took it to the warranty
servicer.
They replaced: OVSA12074 AC Head
QSZBA0RSY012 IC
Now it's just over a year old and the VCR has stopped working.
It is a Funai mechanism and the capstan motor doesn't run so when you put in
a tape it loads then is left hanging out of the cassette on eject.
Does anyone know of a common problem/cure?
I have no desire to waste a lot of troubleshooting time on it as I consider
it a piece of junk anyway. If I had known it was made by Funai, I wouldn't
have bought it. I thought Hitachi was better than that.
Then again, I remember about twenty years ago, finding a Hitachi TV that was
made by GE.
Russ Hoyt
Hoyt's TV
Exeter, NH
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
