[TechAssist] Re: Hitachi 53UDX10BA (2001) poor auto convergence after repair
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 14 Oct 2004 20:54:17 -0400
Phil,
If this is anything like RCA's, you have to go into service menu, adjust
convergence and save it.
Also, in the customer menu, is there a setting for advanced convergence?
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, October 14, 2004 2:55 PM
Subject: [TechAssist] Hitachi 53UDX10BA (2001) poor auto convergence after
repair
On the converg. board, tech replaced the two STK392-110 ic's, some other
IC's, resistor RK58 (burnt).
Now it works but out of convergence. Tried the "auto-focus" automatic
converg function, and seens to go thru the process, but when done, is
still out.
Need some input here to assist this shop.
Thanks,
Phil Bader
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
