David I can send you a schematic for KP43T75--RA-3A chassis it,s 9.7 megs can you recieve it..Eric Eric E M Electronics 59 Wights Rd Deer Lake NL Canada A8A 2J2 Ph# 709 635 2627 tvman@xxxxxxxxxxxxxxx Robinson Electronics wrote: > Still working on this set for a good customer of mine, has been a headache! > The only voltage fault I can find is the low +5v. on the connector CN202 to > the "A" board, measured only 3.6v. > Could not find a test point (TP) on the "G" board to check the main +5v. The > standby +5v. is good. > I subbed out a good "A" board from a good know set, still same problem, so > the problem is localized to the "G" board somewhere. > Can anyone help with this? Or any tips on what to check? > > So far changed: > Both conv. IC's., all the pico fuses were ok, though (must not have been bad > though). > Flyback xfmr. and h.o.t. > Resoldered serveral connections on def. circuit, but didn't look to bad. > Thanks for any help. David. > > > Robinson Electronics > 1075 Sweeten Creek Road #51 > Asheville, NC 28803-1757 > Ph./Fax. 828 274-3787 > Toll Free. 1-888 ROBELECT > www.robinsonelectronics.com > www.robelect.com > Mailto: RobinsonElectronics@xxxxxxxxxxx > > ----- Original Message ----- > From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, November 27, 2005 9:44 PM > Subject: Follow up: Sony Proj. KP-43T90 Chassis RA-3B. No video, sound ok, > OSD / menu is bowed, mis-converged. > > > >>Anyone have any tips or notes on this chassis, working with out a > > schematic? > >>These voltage test points G board check good: >>TP 19v. (ok) >>TP +15v. (ok) >>TP -15v. (ok) >>TP 11v. (ok) >>TP -12v. (ok) >>TP stby 5v. (ok) >>TP 200v. (ok) >>TP 135v. (ok) >>On G board connector CN202 to A board CN501 >>the -5v. (ok) >>but the +5v. measures only 3.6v! >>With clip CN202 lifted +5v. measures 4.3 >>Going to check the 9v. supplies on the A board tomorrow. >>Maybe someone has ran into this before, or can help? >> >>Robinson Electronics >>1075 Sweeten Creek Road #51 >>Asheville, NC 28803-1757 >>Ph./Fax. 828 274-3787 >>Toll Free. 1-888 ROBELECT >>www.robinsonelectronics.com >>www.robelect.com >>Mailto: RobinsonElectronics@xxxxxxxxxxx >> >>----- Original Message ----- >>From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx> >>To: <techassist@xxxxxxxxxxxxx> >>Sent: Monday, November 21, 2005 7:32 PM >>Subject: Sony Proj. KP-43T90 Chassis RA-3B. No video, sound ok, OSD is >>bowed, mis-converged. >> >> >> >>>Can one of you Sony Techs help us out with this set? >>>Set powers on with a blink code of 6 blinks, then led stays on but no >> >>video >> >>>at all, sound is ok though., and the OSD comes on but is bowed and not >>>converged. I changed both of the convergece ic's anyway (not the problem >>>though). >>>Has anyone encountered this, that can help us, or offer some possible >>>problem areas? >>>Thanks. David. >>> >>>Robinson Electronics >>>1075 Sweeten Creek Road #51 >>>Asheville, NC 28803-1757 >>>Ph./Fax. 828 274-3787 >>>Toll Free. 1-888 ROBELECT >>>www.robinsonelectronics.com >>>www.robelect.com >>>Mailto: RobinsonElectronics@xxxxxxxxxxx >>> >> > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search engines. > Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/