Your right I retract the off topic statement. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Gary McCartney" <gary@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 07, 2004 10:09 AM Subject: [TechAssist] Re: Heat sink compound >I use the white stuff, whatever that is. Don't know if its considered > the best or not but wouldn't mind finding out if there is anything > better. The computer over-clockers use this silvery colored stuff with > aluminum powder or something in it, so that might be better but very > expensive. Al, why do you consider this to be off-topic. Sounds like a > perfectly good service question to me. > > > > > Gary McCartney > > McCartney Electronics > Guelph Ontario Canada > Est. 1984 > email: gary (at) number63.ca > > > > > > > > al m wrote: >> I know it's off topic but I haven't thought of what I was buying before. >> Which is better the non silicone or the silicone compound? >> Al Marquardt >> ampm@xxxxxxx >> Al Marquardt Electronic Repair >> 206 W Main >> Girardville Pa. 17935 >> >> >> >> ----------------------------------------------------------------------------- >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/