[TechAssist] GE TVCR 13" 13TVR70 / TVR1/2A mech causes pix fluctuations
- From: Philip Bader <tjanphyl@xxxxxxxxxxxxxxx>
- To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
- Date: Fri, 10 Oct 2003 11:26:29 -0400
Hard to describe.
When the deck mech is engaging, like eject,load,etc the picture will
flutter with the action, like a voltage source is sagging under load.
Sometimes it will actually shut the TV off.I've tested and replaced many
caps in the PS board mounted on the side. Monitored sources,most seem to
vary a bit.None really seemed bad. Caps seem OK.Any histories on this
symptom.model?
Phil Bader
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx
For Professional Technicians Only
*****************************************************************************
Classifieds! Buy or Sell!
http://sell.tech-assist.org
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.htm
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.htm
Lost Password:
http://www.tech-assist.org and select "Lost your Login Info?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
