This set had the horz. output shorted the regulator shorted and 2.7 ohm 15 watt power resistor open. I replaced them all and the 231523 kit. Now the set turns on but it is drawing about 3.5 AMPS and is probably going to blow parts if I leave it on too long. What else am I missing. I read through all the tips but nothing really stands out other than the I.H.V.T but it rings good. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/