Desolder/resolder the grounds around the micro. I have seen noisy audio on the ctc17x-18x caused by micro shield grounds. Also, follow the jumpers on the top of the board, especially the grounds, and ensure that they have good connections. Wayne Vanaman Omega Electronics 6904 W Fairfield Dr Pensacola, Fl. 32506-3310 Wayne@xxxxxxxxxxxxxxxxxxxxx WWW.PensacolaTVRepair.Com 850-456-5995 voice 850-458-6369 fax Barry wrote: > This CTC185AA has a audio interference,sounds like a radio station at very > low level even when in mute. Replaced eprom,did tuner wrap. There is a > carrier wave when scoped even in mute. Has anyone had this problem? > > Barry MacInnes > Television Service Clinic > 2 Church St. W. > W. Lebanon,NH 03784 > foxhole@xxxxxxxxx > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search engines. > Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/