How about the heat sink? Is it also running at 152 degrees. If not, it should be running close. Is the heat sink compound fresh? Dennis Viereck Wayne Vanaman wrote: > Phil: > > I have a 187 on the bench, been running for about 2 hours in a 78 degree > room. The STK measures 152F with my IR thermometer, and yes, too hot to > touch for very long. The things DO run hot. > Oh, the HOT measured 148F. > > Wayne Vanaman > Omega Electronics > 6904 W Fairfield Dr > Penacola, Fl. 32506-3310 > > 850-456-5995 voice > 850-458-6369 fax > > Mailto:Wayne@xxxxxxxxxxxxxxxxxxxxx > WWW.PensacolaTVRepair.Com > > ----- Original Message ----- > From: "Phil Bader" <philbad@xxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, January 11, 2002 1:07 PM > Subject: [TechAssist] [Fwd: RCA 31" CTC187CN2 HOT shorted, replaced with RCA > OEM, runs warm] > > > > > > > > > -------- Original Message -------- > > Subject: RCA 31" CTC187CN2 HOT shorted, replaced with RCA OEM, runs warm > > Date: Fri, 11 Jan 2002 14:05:18 -0500 > > From: Phil Bader <philbad@xxxxxxxxxx> > > Organization: Jan Phyl TV Inc. Winter Haven, Fl. Estab. 1976 > > To: "CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx" > > <CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx> > > > > Came in with the usual whine when plugged in.Shorted HOT. I used an > > RCA/OEM ver. of the BUH517 # 223942. I also changed the STK730-150, > > figured it was stressed. It seems to me after 30 minutes running, the > > HOT sink is uncomfortably warm to touch(can't keep finger on it for > > longer than 3 sec.), tho picture,etc is perfect. I have a "kit" I put > > together containing Q4401 HOT,C4402,CR4402,R4402,CR4403,C4407 as well as > > the STK730. At this point only the HOT and STK are replaced (The STK was > > probably OK). Should I install the rest, or am I missing another part > > causing this warm symptom.Maybe this is normal. Suggestions... > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.