Phil, looks like someone has incorrect information on this, Parts Finder II shows that part number 209852 is a "DYNAMIC FOCUS CBA", part number 196072 is not used in this model and there is no R4704. The part number for the IHVT, T4401 is 208438 and the CRT socket is 207936. The chassis number is the same as you have when the model number is used to call up the parts list so this should be correct information. Jim Myers jr.myers@xxxxxxxxxxx ----- Original Message ----- From: "Phil Bader" <philbad@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 18, 2001 9:15 AM Subject: [TechAssist] Re: [Fwd: Proscan PS35153 (CTC169BJ5) "snaps" heard in CRT neck,pix flashes] > > I went to www.vancebaldwin.com and researched the model.Their parts list > showed a "focus assy ( HV block)" # 209852 and a "Screen-focus control" > #196072,location " R4704".Since the HV block has screen/focus controls > in it, whats with the R4704???And where?. btw i NEED PART# FOR THE crt > SOCKET ASSY( not given on the site). Thx,Phil > > Shoreline Electronics wrote: > > > > I had a defective CRT socket on one of these last year. Was arcing around > > inside the plastic casing. > > Might be worth a shot. > > > > Jeff Stielau > > Shoreline Electronics Repair > > 125 Beechtree Lane > > Westbrook,CT 06498 > > 860-399-1861 Voice > > 860-664-3535 Fax > > jstielau@xxxxxxxx > > > > ----- Original Message ----- > > From: "Phil Bader" <philbad@xxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Monday, September 17, 2001 6:05 PM > > Subject: [TechAssist] [Fwd: Proscan PS35153 (CTC169BJ5) "snaps" heard in CRT > > neck,pix flashes] > > > > > > > > > > > > > > -------- Original Message -------- > > > Subject: Proscan PS35153 (CTC169BJ5) "snaps" heard in CRT neck,pix > > > flashes > > > Date: Mon, 17 Sep 2001 18:05:23 -0400 > > > From: Phil Bader <philbad@xxxxxxxxxx> > > > Organization: Jan Phyl TV Inc. Winter Haven, Fl. Estab. 1976 > > > To: "CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx" > > > <CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx> > > > > > > This is a direct view 35".Customer said it would "lose pix and sound".In > > > shop it came on OK but after about 15 min. I could hear a muffled > > > arc(like when it's inside the CRT neck)and saw the pix lose focus > > > momentarly.I think the arc may have locked the micro for him.With the > > > back off I zeroed in with my ears to the CRT neck assy as the origin of > > > the sound.I've heard 25 years of CRT guns arcing (like Zeniths!)and this > > > sounds like that. Now, this TV uses a seperate G2/focus assembly from > > > the flyback. Could this focus block failing INDUCE the heard arc? Or is > > > this CRT toast? (CRT: A89AFF15X01, focus blocks# on part: 80432-20A, > > > 3A1901) > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.