try unplugging high voltage block al marquardt ampm@xxxxxxx ----- Original Message ----- From: Phil Bader <philbad@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 19, 2001 11:49 AM Subject: [TechAssist] [Fwd: Proscan PS27151 (RCA,CTC169CE2)dead no shorts] > > > > -------- Original Message -------- > Subject: Proscan PS27151 (RCA,CTC169CE2)dead no shorts > Date: Wed, 19 Sep 2001 14:48:26 -0400 > From: Phil Bader <philbad@xxxxxxxxxx> > Organization: Jan Phyl TV Inc. Winter Haven, Fl. Estab. 1976 > To: "CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx" > <CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx> > > No squeel in stby,HOT OK, all diodes around HOT OK,Fuses OK.U4101 SMPS > IC has most all voltages except pin 14 (to base of Reg Q4101) which is > zero. I changed U4101 and Q4101 as test. Plug in and I hear a very faint > tic,tic,tic(exactly three).Still dead and no response with remote or > power button.Changed the 'lytics around the U4101 area.The 2 watt > resistors nearby all OK. Has Vcc on U4101. Zero volts on HOT collector > in stby.CR4118 OK. U 4101 seems to have what it needs,just > unresponsive.On one U4101 pin my fluke shows the analog bar in the > digital display as pulsating up and down at 1 sec rate.Changed D4118 as > test. (I'm stumped).-Phil > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.