-------- Original Message -------- Subject: Acer 7276e (JVP7276e)dead.now works,horiz piecrusting still after IC201 replaced. Date: Fri, 22 Feb 2002 16:44:21 -0500 From: Phil Bader <philbad@xxxxxxxxxx> Organization: Jan Phyl TV Inc. Winter Haven, Fl. Est.1976.voice / fax 863-299-8821 See below thread. Other emails had luck clearing this horizontal instability with replacing IC201,TDA4858. Did that, no change. What is causing this jagged display (even on OSD)We used to call it "pie-crusting" because of the horiz. jagged edges on everything.Help! -------- Original Message -------- Subject: Acer7276e IC201 cross question Date: Mon, 11 Feb 2002 10:18:00 -0500 From: Phil Bader <philbad@xxxxxxxxxx> Organization: Jan Phyl TV Inc. Winter Haven, Fl. Est.1976.vioce/fax 863-299-8821 Allen, I restored this dead Acer to working (C327,R241, pico fuse J013) but now way out of horiz, sync. Unit uses a TDA4858 as IC201.(I suspect it) I have a TDA4856 in stock,discription and specs seem similar.Same# pins.Are they interchangible? Thanks. If not, need cost/avail.on the original TDA 4858.Thanks-Phil ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.