[TechAssist] Re: Fw: Sony KV27XBR, changed ic301 because of tearing, now pincushion and lousy colour`
- From: "Don Hartigan" <hartstv@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 6 Feb 2002 21:16:10 -0400
Hi Wilf,as per Eric's post.,i recently repaired a 32''Sony with hour
glass.Fix was Q505=2SC3298B,R571=4.7ohm1watt,R518=4.7ohm1watt
..regards...Don of
HARTS-TVCR''ASC''
9-Robert St.,Oromocto,NewBrunswick,CAN
Tel#506-357-9785Fax#506-357-6010
----- Original Message -----
From: "Eric Manuel" <tvman@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, February 06, 2002 8:28 PM
Subject: [TechAssist] Re: Fw: Sony KV27XBR, changed ic301 because of
tearing, now pincushion and lousy colour`
>
> Hi Wilf this is for Kv27XBR15 dont know if it,s the same but check on
> the A
> board the following.L501-R571-Q505-D512..Eric
>
> "W. Blakey" wrote:
> >
> > I just changed the video jungle ic on this set to cure a bad horizontal
tearing (it did the job) but now I have something not related to the
original problem. The picture is too wide with an hour glass shape. Also the
picture looks like it is lacking color and possibly red color. I am also
having difficulty to access and change the video adjust menu as the menu
dissappears when I try to change it. Does anyone have a clue as to what I
might have done or what might be wrong?
> > Wilf Blakey/Blakey TV,Kirkland Lake,Ont
> > wblakey@xxxxxxxxxxxxxxxx
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
