> pins 1&2connect pins11& 12 connect pins 3 & 5 connect pins 4, 7, 8,9, 10, > connect.If you have no startup try changing C4312 it's the horizontal vcc > startup. check pin 57 of ICU1001 and see if you have 6.7V there.if not pin 6 > U4101 for 8.9 v look for lectrolite around C4312. > al marquardt > ampm@xxxxxxx > > > ----- Original Message ----- > From: "roger birmingham" <rogerselectronics@xxxxxxxxx> > To: <Techassist@xxxxxxxxxxxxx> > Sent: Friday, October 11, 2002 10:11 AM > Subject: [TechAssist] RCA-CTC149(Need pinout readings) > > > > > > Would like to know pinout readings on flyback transformer. > > > > (May have open transformer) > > > > (No schmatic on this chassis) > > > > Thanks, > > > > Rogers Electronics > > > > 1225 Birmingham Road > > > > Sulligent, Alabama 35586 > > > > 1-205-698-8047 > > > > > > > > --------------------------------- > > Do you Yahoo!? > > Faith Hill - Exclusive Performances, Videos, & more > > faith.yahoo.com > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/