The problem was definitely the FLYBACK. Appreciate everyones help. Kevin Gunn Star Tek Electronic Services 390 Springbank Drive London, Ontario www.startek.701.com N6J 1G9 519-473-6366 ----- Original Message ----- From: Kevin Gunn To: techassist@xxxxxxxxxxxxx Sent: Monday, November 04, 2002 10:10 PM Subject: DAEWOO 710B FCC C5F7NFCMC1710B * No HV* I have a 17" Daewoo 710b FCC ID C5F7NCMC1710B that came in with a burnt resistor located at R935. The HV will try to start up then stop. I found that the value is 82K ohm resistor. My question is there something I should also check to see why this resistor burnt. I checked all the obvious but everything checks OK. Kevin Gunn Star Tek Electronic Services 390 Springbank Drive London, Ontario www.startek.701.com N6J 1G9 519-473-6366 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/