[TechAssist] Re: Fixed VCR, Go Video DDV9550 New problem
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 6 May 2004 09:27:25 -0400
Still on the bottom
Al Marquardt
ampm@xxxxxxx
Al Marquardt Electronic Repair
206 W Main
Girardville Pa. 17935
----- Original Message -----
From: <MagLfixIt4ya@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, May 06, 2004 8:05 AM
Subject: [TechAssist] Re: Fixed VCR, Go Video DDV9550 New problem
> In a message dated 5/5/2004 5:19:16 PM Eastern Daylight Time,
> support@xxxxxxxxxxxxxxxxxx writes:
> > Subj: [TechAssist] Re: Fixed VCR, Go Video DDV9550 New problem
> > Date: 5/5/2004 5:19:16 PM Eastern Daylight Time
> > From: support@xxxxxxxxxxxxxxxxxx
> > Reply-to: techassist@xxxxxxxxxxxxx
> > To: techassist@xxxxxxxxxxxxx
> > CC: MagLfixIt4ya@xxxxxxx
> > Sent from the Internet
> >
> > Jeff, do you mean my reply to Phil? I thought I did put it on the top,
just
> > like I am putting this reply to you on the top. Am I missing something?
> > Don
> > Don,
> > I suggest you make sure your post is at the top of the email..
> > all lines on this reply look like part of the previous email.
> > Jeff
> > --
> > Intrepid Video TV/VCR Repair
> > 263 S Front St, Steelton PA 17113
> > 717-939-7708; (F) 717-564-4952
> > www.intrepid-video.com www.tech-repair.net
> > ----- Original Message -----
> > From: <MagLfixIt4ya@xxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, May 05, 2004 2:50 PM
> > Subject: [TechAssist] Re: Fixed VCR, Go Video DDV9550 New problem
> >
> >
> > In a message dated 5/4/2004 4:09:51 PM Eastern Daylight Time,
> > tjanphyl@xxxxxxxxxxxxxxx writes:
> > >Subj: [TechAssist] Re: VCR, Go Video DDV9550 New problem
> > > Date: 5/4/2004 4:09:51 PM Eastern Daylight Time
> > > From: tjanphyl@xxxxxxxxxxxxxxx
> > > Reply-to: techassist@xxxxxxxxxxxxx
> > > To: techassist@xxxxxxxxxxxxx
> > > Sent from the Internet
> > >
> > >Ok Phil, It turns out there was a cable just slightly out, I must have
> > >knocked it out when putting the set back together and thanks for the
> > nomination
> > >for the seat of president of the "TIP" club but I must decline, can I
be
> > VP?
> > >(-; LOL!
> > >Don
> > >well, as the local president of the "TIP" club (Technician- Induced-
> > >Problems) I am qualified to assist.
> > >I found when I did similar things it was components that got laid over
> > >on the board and touched another lead. Look closely for any parts bent
> > >over or touching. probe around. Also on some of these units with
> > >interconnections where a ribbon cable mates with a strip, there can be
a
> > >problem seating.
> > >just a thought.
> > >You may unseat me as local president! ;-)
> > >Good luck, friend.
> > >Phil Bader
> > >
> > >MagLfixIt4ya@xxxxxxx wrote:
> > >
> > >>In a message dated 5/3/2004 3:22:37 PM Eastern Daylight Time,
> > >>support@xxxxxxxxxxxxxxxxxx writes:
> > >>
> > >>
> > >>>Subj: [TechAssist] Re: VCR, Go Video DDV9550 looks like bad heads
> > >>>Date: 5/3/2004 3:22:37 PM Eastern Daylight Time
> > >>>From: support@xxxxxxxxxxxxxxxxxx
> > >>>Reply-to: techassist@xxxxxxxxxxxxx
> > >>>To: techassist@xxxxxxxxxxxxx
> > >>>Sent from the Internet
> > >>>
> > >>>Hello all, thank you to everyone who responded to this post, the
bellow
> > >>>solution fixed the original problem, however now I have a new problem
and
> >
> > >I dont
> > >>>know what happened. After restoring a good pic I put the unit back
> > >together
> > >>>and tested again but this time I have no video at all, not from
antenna
> > >out
> > >>>and not from video out (RCA connections), I am not even getting the
blue
> > >>>screen. I took it apart and put it back together again to see if
there
> > was
> > >a bad or
> > >>>loose connection but still nothing. Im not sure if I did something to
> > >loose
> > >>>the video or if this was just waiting to happen, what ever happened
Im in
> >
> > >the
> > >>>dark, any help is appreciated.
> > >>>Don from Affordable Electronics.
> > >>>Don,
> > >>>Check for poor ground connections on preamp section, first. If
there's a
> > >>>place for a screw there, replace
> > >>>the screw and try it. Flex the ribbon cable and see if symptoms
improve.
> > >>>Jeff
> > >>>--
> > >>>Intrepid Video TV/VCR Repair
> > >>>263 S Front St, Steelton PA 17113
> > >>>717-939-7708; (F) 717-564-4952
> > >>>www.intrepid-video.com www.tech-repair.net
> > >>>----- Original Message -----
> > >>>From: <MagLfixIt4ya@xxxxxxx>
> > >>>To: <techassist@xxxxxxxxxxxxx>
> > >>>Sent: Monday, May 03, 2004 12:42 PM
> > >>>Subject: [TechAssist] VCR, Go Video DDV9550 looks like bad heads
> > >>>
> > >>>
> > >>>Hello all, Playback of known good tape (movie) on deck 2 has video
noise,
> >
> > >I
> > >>>cleaned heads but no cigar, then switched heads from deck 1 to deck 2
and
> >
> > >>>put
> > >>>deck 2's heads in deck 1, deck 2 side still has the noise so I am
ruling
> > >out
> > >>>bad heads. The noise looks like stars with tails across the screen.
Has
> > >>>anyone
> > >>>seen this? Any help is appreciated.
> > >>>
> > >>>Don@ Affordable Electronics Repair
> > >>> 153 Garfield Place
> > >>> Brooklyn NY 11215
> > >>> 718-788-0384
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >
>
> --------------------------------------------------------------------------
---
> > >>>
> > >>>Lost Password:
> > >>>http://www.tech-assist.org and select "Login Problems?".
> > >>>Email Archives:
> > >>>//www.freelists.org/archives/techassist/
> > >>>
> > >>>
> > >>>
> > >>>
> > >
>
> --------------------------------------------------------------------------
---
> > >>>
> > >>>Lost Password:
> > >>>http://www.tech-assist.org and select "Login Problems?".
> > >>>Email Archives:
> > >>>//www.freelists.org/archives/techassist/
> > >>>
> > >>>
> > >>>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
>
> --------------------------------------------------------------------------
---
> > >>Lost Password:
> > >>http://www.tech-assist.org and select "Login Problems?".
> > >>Email Archives:
> > >>//www.freelists.org/archives/techassist/
> > >>
> > >>
> > >>
> > >
> > >--
> > >
> > >Philip Bader
> > >Jan Phyl TV Inc. (estab. 1976)
> > >3420 Recker Hwy. Winter Haven, Fl. 33880
> > >Fax (863) 299-8821
> > >email: tjanphyl@xxxxxxxxxxxxxxx
> > >
> > >
> > >
> > >
>
> --------------------------------------------------------------------------
---
> > >
> > >Lost Password:
> > >http://www.tech-assist.org and select "Login Problems?".
> > >Email Archives:
> > >//www.freelists.org/archives/techassist/
> > >
> >
> >
> >
> >
>
> --------------------------------------------------------------------------
---
> >
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
> >
> >
>
> --------------------------------------------------------------------------
---
> >
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
