TELEVISION Quasar VV2017W Dead, Stdby only 2v PR1001(1.5Amp), caused by metal someone had put in unit. That was the fix! I pulled a metal bolt and wingnut from the chassis. These small fuses are at the front of the VCR switchibg power supply on the viewer's right side.Had to pull the whole chassis, Dremmel-cut a hole in the plastic frame to access trace side of fuses (saved deck removal and extensive teardown). Unit powered on with good picture in tuner and VCR playback. Thanks so much. Phil Bader Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx Gary McCartney wrote: >Found some tips for dead "VV....." model sets: > > >TELEVISION Quasar VV-1301 Dead, Stdby only 2v >PR1001(1.5Amp), caused by metal barrette someone had put in unit. > > > >TELEVISION QUASAR VV2000 Clicks, dead PR1201(1Amp) > > > >TELEVISION QUASAR VV2007 LD - DEAD (LED COMES ON) >D806(1N4148), Q810(NTE 85), Q541 & Q505(NTE 2362) > > > >TELEVISION QUASAR VV2006 TV won't POWER up. VCR loads, >plays >and stops. Q51 (NTE56) and Q52 (NTE199) in VCR reg circuit. > > > >TELEVISION Quasar vv8802 dead c553 cracked >.0022@2kv,r802 >5.6 3watt,q551 2sd144 > > > >TELEVISION QUASAR VV-2000 WILL NOT TURN ON/NO POWER UP >Q801 >LEAKY 2SC945 > > > >TELEVISION QUASAR VV2005 DEAD VCR WORKS BUT TV IS DEAD >(POWER >LIGHT FLASHES0 REPLACE Q521 , Q522, AND Q523 > > > >TELEVISION QUASAR VV2016 DEAD, POSSIBLE SURGE REPLACE >Q523 >2SA564 > > > >TELEVISION QUASAR VV2005 VCR OK, TV WONT TURN ON >REPLACE >Q521, Q522, Q523 > > > >TELEVISION QUASAR VV1307 DEAD AFTER BROWNOUT REPLACE >Q1001 >ECG2339, Q1002 2SD1458, FUSE > > > >TELEVISION QUASAR VV7220 NO TV OPERATION REPLACE >Q553 2KV2200, >R804, R802, Q551, IC801 (REG) > > > > >Gary McCartney > >McCartney Electronics >Guelph Ontario Canada >Est. 1984 >email: gary (at) number63.ca > > > > > > > > >Phil Bader wrote: > > >>This is totally dead, no LED lites, no movement, nothing. Fuses all OK. >>There is about +12VDC at collector of power relay transistor Q801. Push >>power while monitoring Q801's base and nothing. A metal bolt fell out os >>the chassis so I fear a short I can't find. Aside from the bolt is there >>anything that's a repeat offender with these? >>Phil Bader >> >> >> > >----------------------------------------------------------------------------- >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/