[TechAssist] Re: Dual Tunrtable model 1214 won't pick up arm at end of record
- From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 25 Jun 2004 17:32:01 -0400
Durn young whippersnappers.
WD 40 wasn't around, when I was working on record changers.
Russ Hoyt
Hoyt's TV
Exeter, NH
----- Original Message -----
From: "Peter oliver" <oliver_peter1@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, June 25, 2004 3:23 PM
Subject: [TechAssist] Re: Dual Tunrtable model 1214 won't pick up arm at end
of record
> Usually it is either a stuck lever or the trip arm not pushing right. My
> favorate solvent is WD-40 to remove the old grease then relube with
syntheic
> oil (ie 5w-15) some times a bit of white lithium grease too. Generally all
> of the levers trips etc need to be able to move freely. Might have a paper
> copy of the manual (we were doing dual warranty at the time these were
new)
> but usually the manual is not that helpful on these, they are just
> mechanicly rather elabrate for a turntable. My father is actaully at the
> shop today who is the real expert when it comes to these.
>
> Peter Oliver
> Tucson Radio TV
>
>
> From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx>
> Reply-To: techassist@xxxxxxxxxxxxx
> To: <techassist@xxxxxxxxxxxxx>
> Subject: [TechAssist] Re: Dual Tunrtable model 1214 won't pick up arm at
> end of record
> Date: Thu, 24 Jun 2004 20:56:25 -0400
>
> I can't tell you specifically about the Dual, but usually there is a lever
> that the arm under the turntable pushes against at the end of it's swing.
> Most problems are caused by dried grease/oil that won't allow trip levers
to
> move like they should. I have used tuner cleaner as a quick way to find
that
> type of problem but after locating it, you need to disassemble it and
clean
> it. Then oil it if it' is supposed to be oiled, but some are supposed to
be
> dry.
>
>
> Russ Hoyt
> Hoyt's TV
> Exeter, NH
>
>
> ----- Original Message -----
> From: "albert walfield" <albertwalfield@xxxxxxxxxxxxxxx>
> To: "TechAssist" <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, June 24, 2004 6:48 PM
> Subject: [TechAssist] Dual Tunrtable model 1214 won't pick up arm at end
of
> record
>
>
> > Don't laugh these are tough times
> >
> > Do not see an adjustment for this. If you take the arm and take it in
> about
> > a 1/4 inch it activates. Never had a problem with Dual turntables.
> >
> > The young people are digging out their parents turntables to play
vinyl.
> >
> > Any help would be appreciated
> >
> > Albert Walfield
> >
> > Albert Walfield's Electronics
> > 28 Mulock Rd.
> > RR#3
> > Bridgewater
> > Nova Scotia
> > CANADA
> > B4V 2W2
> > Phone/Fax 902 543-9831
> > Email : albertwalfield@xxxxxxxxxxxxxxx
> >
> >
> >
> >
> >
> >
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
> _________________________________________________________________
> MSN Movies - Trailers, showtimes, DVD's, and the latest news from
Hollywood!
> http://movies.msn.click-url.com/go/onm00200509ave/direct/01/
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
