[TechAssist] Re: Disabling Zenith 9-1084 PIP
- From: Bill Boyd <billstvs@xxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 04 Nov 2002 16:32:05 -0600
Jump pin 2 to 2 and pin 3 to 3
or just use one of the cables to jump the two
sockets together on the main board.
HTH
Bill
Bill's TV Service
Sulphur Springs, TX
>From: <southadamstv@xxxxxxxxxxxxxxxx>
>To: techassist@xxxxxxxxxxxxx
>Subject: [TechAssist] Disabling Zenith 9-1084 PIP
>Date: Mon, 4 Nov 2002 10:09:25 -0600
>
>
>Hello;
>The 9-1084 PIP module for a Zenith SJ5775Y seems to be no longer availabe.
>Can the module be safely disabled by jumping the center pin of 9C4 to the
>center pin of 9D4? Appreciate any help, Larry K.
>
>Larry J. Kibodeaux
>South Adams TV & VCR Repair
>216 1/2 South Adams Avenue
>Rayne, LA 70578
>southadamstv@xxxxxxxxxxxxxxxx
>
>------------------------------------------
>To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here:
>http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
