See if this chassis has a small transistor Q805 (C3203Y).In another model (DTQ26S1FC) it shorts causing dead set. It's an overcurrent shut down.I can remove it and set works.It gets fried a lot,but if bad be sure to replace it. Removal is only a test.Worth a shot. Craig Harrison wrote: > > Hi everyone. I have a Daewoo DTQ-25G1 in for service that continually > cycles on/off as soon as it's plugged in.I have changed the SMPS > controller IC with no difference. Has anyone seen this? It's acting a > lot like the older RCA's that acted this way in an overcurrent shutdown > condition. Also, I have check both horizontal system timing and loading > and no fault is evident there. Any ideas would be appreciated. > Craig > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.