Was planning for a while to get one of these but never did get around to sending an order. Looks like putting things off was a plus in this case. Al G Al's TV-Electronics Pembroke Ont. Canada Ty wrote: > > Reminds me of the Thomson Tuner Modifications. > It took them a looong time to admit there was a problem. > At leas that made us a few bucks. > BUT the problem we are having with CC is only our miscomprehension of a > superior product we are incapable of comprehending. > If you do not believe me, confirm it with Thomson! >(;o) > > Ty > > Tiberius Kraemer > BLUE STAR ELECTRONICS > 3312 Silverton Rd. NE > Salem, Oregon > Phone: 503 391 1491 > Mailto:ty1k@xxxxxxxxxxx > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Intrepid Video > Support > Sent: Tuesday, April 27, 2004 2:09 PM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: Chipper Check 1.83a > > Don't plan on replacing it... > I just heard Sencore raised the price to $499 a piece...that's right EACH! > Seems, they had to hire one full time tech just for these. > Jeff > -- > Intrepid Video TV/VCR Repair > 263 S Front St, Steelton PA 17113 > 717-939-7708; (F) 717-564-4952 > www.intrepid-video.com www.tech-repair.net > ----- Original Message ----- > From: "walter wood" <wwood_38478@xxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, April 27, 2004 3:37 PM > Subject: [TechAssist] Re: Chipper Check 1.83a > > For there to be nothing wrong with CC, there sure a > lot of us having problems with it. > I've been fighting this dragon nearly a year. > Mine still doesn't work even though all > modifications have been made and the self diagnosis > feature reports everything is just fine. > Sencore blames Thomson, and Thomson refers us right > back to Sencore. > What a crock!!! > Walter > --- Jim Shupe <jim@xxxxxxxxxxxxx> wrote: > > Hi Guys... > > > > I finally got ahold of RCA techline Monday > > afternoon. > > According to Peggy, I'm just confused. She says > > that > > since Chipper Check is not very smart, this IP > > address > > message is its way of saying it can't establish > > communication with the subject chassis. > > If you ask me, it's an example of poorly > > written > > software. These things(HD sets) are hard enough > > to > > figure out, without the added encumbrance of > > cryptic > > messages from software tools to deal with. > > She says there is no problem with Chipper Check > > v1.83a at all. After I get this set going, I will > > recheck everything and update this post. > > > > Thanks for all the responses. > > > > Jim Shupe, CET > > Lloyd's TV > > Yucca Valley, CA > > > > > > --- Jim Shupe <jim@xxxxxxxxxxxxx> wrote: > > > Thanks, Robert > > > > > > Jim Shupe, CET > > > Lloyd's TV > > > Yucca Valley, CA > > > > > > --- tvservice <tvservice@xxxxxxxxxxxxx> wrote: > > > > Jim, I realize what you are saying > > > > I too have CC version 1.83a on a desktop and > > my > > > > laptop. I have not been > > > > able to get communication on any ATC221 or > > ITC222, > > > > and I always get a > > > > message stating that the IP is not configured > > > > properly on the ATC311 > > > > chassis, although it is set just as the > > > instructions > > > > say. > > > > I found I really didn't need CC on these > > chassis > > > > Maybe the next ATC311 I get I can spend more > > time > > > on > > > > and try to get it to > > > > work. > > > > Robert > > > > tvservice@xxxxxxxxxxxxx > > > > H & H Electronics Inc > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Original Message ----- > > > > From: "Jim Shupe" <jim@xxxxxxxxxxxxx> > > > > To: <techassist@xxxxxxxxxxxxx> > > > > Sent: Thursday, April 22, 2004 8:40 PM > > > > Subject: [TechAssist] Re: Chipper Check 1.83a > > > > > > > > > > > > > Robert... > > > > > > > > > > I agree.. the CC hardware is pretty lame > > and > > > > > limited, although it IS a tool, regardless > > how > > > > poor, > > > > > and has kind of paid its way. > > > > > My unit is upgraded(I believe) to the > > latest, > > > > and > > > > > still works with all the chassis' that I > > have > > > > adapters > > > > > for. > > > > > > > > > > All that aside, I have to say I must have > > not > > > > made > > > > > my post clear... the CC I'm having trouble > > with > > > is > > > > > v1.83a, which is the latest(Mar 15,04). > > This is > > > > the > > > > > tool RCA provides to communicate, via > > ethernet, > > > > > between a PC and the DM2CR module, which > > houses > > > > the > > > > > system micro. The hardware CC is no longer > > used > > > > with > > > > > this chassis(DLP). > > > > > When I attempt to establish > > > communication("dead > > > > set" > > > > > option), the CC program tells me I have to > > > change > > > > my > > > > > IP address and subnet mask, which I have > > done > > > and > > > > > quadruple-checked, but CC cannot see it. > > > > > The really odd thing is that the IP > > address > > > that > > > > CC > > > > > reports mine as being(which it is NOT), is > > the > > > > same > > > > > address CC asks you to input to the chassis > > > > through > > > > > the service menu("identify chassis" setup). > > > > > > > > > > I just don't get it. I want to believe I'm > > > doing > > > > > something wrong so that someone can say > > > "yeah..the > > > > > setup works if you...". If I just knew that > > this > > > > deal > > > > > works then I'd just order a DM2 and go from > > > > > there...but having to fork out the $$ for > > the > > > part > > > > and > > > > > core 'til the paperwork pays is kinda tough > > for > > > a > > > > > small business in a small town. I'd like to > > have > > > > that > > > > > confidence. > > > > > > > > > > Thanks for everyone's responses. > > > > > > > > > > Jim Shupe, CET > > > > > Lloyd's TV > > > > > Yucca Valley, CA > > > > > > > > > > y > > > > > --- tvservice <tvservice@xxxxxxxxxxxxx> > > wrote: > > > > > > I have the same problem CC only seems to > > work > > > > MMC > > > > > > and DTV chassis that work. > > > > > > If the set is dead CC will not > > communicate > > > with > > > > > > eeprom > > > > > > Haven't found a need for it on the newer > > set's > > > > > > I personally think it's pretty much > > worthless > > > on > > > > > > anything newer than ATC113 > > > > > > > > > > > > Robert > > > > > > tvservice@xxxxxxxxxxxxx > > > > > > H & H Electronics Inc > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "walter wood" > > <wwood_38478@xxxxxxxxx> > > > > > > To: <techassist@xxxxxxxxxxxxx> > > > > > > Sent: Thursday, April 22, 2004 12:17 PM > > > > > > Subject: [TechAssist] Re: Chipper Check > > 1.83a > > > > > > > > > > > > > > > > > > > Jim, I've never gotten CC to work at > > all > > > with > > > > the > > > > > > > MMC and newer sets, and never tried it > > on > > > the > > > > > > older > > > > > > > ones. > > > > > > > The updates have been done and the self > > > checks > > > > say > > > > > > > everything is ok. > > > > > > > Thomson will not help with it. > > > > > > > You must contact Sencore. > > > > > > > They have been no help either. > > > > > > > Call for Kevin at Sencore > > 1-800-736-2673 > > > ext. > > > > 409. > > > > > > > Good luck, and if you have any success, > > > PLEASE > > > > > > > share it with the rest of us. > > > > > > > Walter > > > > > > > --- Jim Shupe <jim@xxxxxxxxxxxxx> > > wrote: > > > > > > > > Hi all.. > > > > > > > > > > > > > > > > Sorry for that first post with no > > > > > > content...hit > > > > > > > > the > > > > > > > > wrong key. > > > > > > > > > > > > > > > > Has ANY one out there gotten the > > latest > > > > > > version > > > > > > > > of > > > > > > > > this thing to work with ANY ethernet > > > > connection? > > > > > > > > > > > > > > > > Haven't been able to get ahold of > > > techline > > > > > > > > (probably > > > > > > > > because of the storms) and my > > regional guy > > > > is > > > > > > out > > > > > > > > of > > > > > > > > the office. > > > > > > > > > > > > > > > > I've used two pc's(winxp and winme) > > and > > > am > > > > > > > > unable to > > > > > > > > establish a connection. > > > > > > > > > > > > > > > > I don't have a working set with > > this > > > > feature > > > > > > to > > > > > > > > test > > > > > > > > my setup against: the DLP set I'm > > working > > > on > > > > is > > > > > > > > dead, > > > > > > > > so I need to know if the latest RCA > > > software > > > > > > > > really > > > > > > > > does work. > > > > > > > > > > > > > > > > BTW.. I do have the CAT 5 crossover > > > cable. > > > > > > > > ...and TIA > > > > > > > > > > > > > > > > Jim Shupe, CET > > > > > > > > Lloyd's TV > > > > > > > > Yucca Valley, CA > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > > > > --- > > > > > > > > Lost Password: > > > > > > > > http://www.tech-assist.org and > > select > > > > "Login > > > > > > > > Problems?". > > > > > > > > Email Archives: > > > > > > > > > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > > > > > > > > > ===== > > > > > > > Walter Wood > > > > > > > Future Tech Home Center > > > > > > > 2786 Hwy. 43 N. > > > > > > > Lawrenceburg Tn. 38464 > > > > > > > 931-829-3337 > > > > > > > Fax 931-829-4044 > > > > > > > mailto:wwood_38478@xxxxxxxxx > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > __________________________________ > > > > > > > Do you Yahoo!? > > > > > > > Yahoo! Photos: High-quality 4x6 digital > > > prints > > > > for > > > > > > 25¢ > > > > > > > http://photos.yahoo.com/ph/print_splash > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > > > > --- > > > > > > > Lost Password: > > > > > > > http://www.tech-assist.org and select > > > "Login > > > > > > Problems?". > > > > > > > Email Archives: > > > > > > > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > > --- > > > > > > Lost Password: > > > > > > http://www.tech-assist.org and select > > "Login > > > > > > Problems?". > > > > > > Email Archives: > > > > > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > > --- > > > > > Lost Password: > > > > > http://www.tech-assist.org and select > > "Login > > > > Problems?". > > > > > Email Archives: > > > > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------------- > - > > > > Lost Password: > > > > http://www.tech-assist.org and select "Login > > > > Problems?". > > > > Email Archives: > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > ---------------------------------------------------------------------------- > - > > Lost Password: > > http://www.tech-assist.org and select "Login > > Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > ===== > Walter Wood > Future Tech Home Center > 2786 Hwy. 43 N. > Lawrenceburg Tn. 38464 > 931-829-3337 > Fax 931-829-4044 > mailto:wwood_38478@xxxxxxxxx > > __________________________________ > Do you Yahoo!? > Win a $20,000 Career Makeover at Yahoo! HotJobs > http://hotjobs.sweepstakes.yahoo.com/careermakeover > > ---------------------------------------------------------------------------- > - > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ---------------------------------------------------------------------------- > - > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/