[TechAssist] Re: CTX monitor
- From: Al Gutz <alg@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 04 May 2004 23:21:46 -0400
Power Mosfets go bad they will normally show shorted on ohms test. Good
ones on diode test will read open most times but some will show foward
bias reading from gate to soruce.
Al G
Al's TV-Electronics
Pembroke Ont.
Canada
peggs wrote:
> model VL700
> FCC ID: DBL1769E
>
> picture is too wide and width is not adjustable.
> Pincushion, it appears, is not adjustable either.
> I don't have a manual and there are MOSFETS in the
> Horiz. Yoke 'area',which I don't know if they are bad or
> not.Is there a way of checking these ???
> Any tips on Troubleshooting this symptom ???
>
> Peggs
>
> Peggs' Electronics
> 1519 West 2nd Street
> Owensboro,KY 42301
> 270-926-4968
> fax 270-686-7399
> peggs@xxxxxxxxxxxxx
>
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
