[TechAssist] Re: CTC185AB picture piecrusting

  • From: "Larry E." <videotech@xxxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Tue, 26 Feb 2002 16:47:29 -0500

Barry, I had one similiar to that and after replacing Q4114 it ran very 
hot  and it turned
out to be R4103  .51 ohm 2 watt 2%  yes that`s point 51 ohms  strange 
value but it fixed mine, good luck, Larry E. American TV & Electronics

Barry wrote:

>Hello Gang,
>       This set, after warmup , gives a wavy picture with audio humm. Q 4114
>regulator runs hot. I have replaced power regulator kit (part # 231523) to
>no avail. Has anyone seen this problem?
>thanks,
>Barry
>TV Service Clinic
>W. Lebanon, NH
>------------------------------------------
>Make your TechAssist database better!  
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
>


------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: