Check pin 7 of switching transformer for bad solder etc. C4107 may be bad. Check C4105............Charlie Charles Belich Slidewire Electronics MN seashell@xxxxxxxxxx ----- Original Message ----- From: "sterling pasher" <spasher@xxxxxxxxxxxxxxxxx> To: <Techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 11, 2001 1:39 PM Subject: [TechAssist] CTC177 SMPS > > I have a CTC177that is putting out too much voltage from power > supply, ithas only to be plugged in to AC. At test point 4101 get 340 > vvolts(should be 140) If left on for more than a sexcond it will cause pins > 4 and 5 to short. And causes C4107 to explode. Besides U4101 changed R4110 > (open) and R4126 (burnt). > > > Any help on this ptoblem would be appreciated . > > Buck > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.