[TechAssist] Re: CTC169BG chassis. Has a horizontal line across the screen, when first powered on.
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 2 Sep 2004 22:08:54 -0400
David,
Can you include the model number so we have an idea if you're talking about a
direct view, or projection?
If direct view, try banging on the tuner or tapping the vertical IC heat sink
to see if symptom changes.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, September 02, 2004 1:51 PM
Subject: [TechAssist] CTC169BG chassis. Has a horizontal line across the
screen, when first powered on.
Has anyone seen this before?
Vertical circuit checks out good, cannot find any faults!
This set, when first turned on, has a line across the middle of the screen,
while the relay degausses, then the vertical comes up good. Does it every
time.
Any known components to check out for this? Thanks. David.
Robinson Electronics
1075 Sweeten Creek Road
Asheville, NC 28803
Ph./Fax. 828 274-3787
Toll Free. 1-888 ROBELECT
www.robinsonelectronics.com
www.robelect.com
Mailto: RobinsonElectronics@xxxxxxxxxxx
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
