Ken, Did you check the voltage on diode CR4118? Located off of pin 3 of power supply transformer. Should be 15v, if low replace diode(#164590). Dan Webster Webster's TV Shullsburg, Wi. ----- Original Message ----- From: "Alltv" <alltv@xxxxxxxxxxxxx> To: "Techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 14, 2004 7:30 PM Subject: [TechAssist] CTC169BD5 dead power supply chirps > Hi group, > This set came in with shorted HOT and bad C4402. Replaced them and power > supply chirps won't turn on. I checked and replaced regulator ic and the > caps next to it. pin 16 on U4101 comes up to 10v when I lift the pin. CR4122 > 3v zener also checked like leaky I replaced and no change. > Please help > thanks in advance > **************************************************************************** > ********** > All TV Appliance Service > Ken Dinckan > 2747-B Roosevelt Street > Carlsbad CA, 92008 > (760) 434-1131 > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/