[TechAssist] Re: CTC169
- From: Ralph Dorsey <Merlin-Wizard@xxxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 29 Nov 2001 01:59:39 -0600
leaky caps,,,damn now i've really got something to worry about ( i thought i'd
jump in)
Jerry wrote:
> Yeah, leaky caps on an RCA tv is a rare thing. I've been working on RCA
> products for a quarter of a century!
> Jerry
> Christians Electronic Service
> ----- Original Message -----
> From: "Bill Grabowski" <bgrabowski@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, November 27, 2001 9:47 PM
> Subject: [TechAssist] Re: CTC169
>
> |
> | I've been working on CTC169's for ten years but I never found a leaky
> | cap that I
> | can think of......
> |
> | Bill Grabowski
> | Triangle Appliance
> |
> |
> | "Leonard G. Caillouet" wrote:
> | >
> | > I am wondering if you all have seen many leaky caps in these sets. I
> just
> | > did two this week that had leaky Nichicon 105 degree caps. The
> electrolyte
> | > caused enough corrosion to damage a couple of traces. These are the
> first I
> | > have seen like this and am wondering if we can expect this to be as
> common
> | > as in the Hitachi and Misubishi projection sets. How far do you guys go
> in
> | > looking for other caps going bad on these sets. I have found that
> sometimes
> | > the only way that you can find them is to heat the pins and see if they
> | > smell or remove them and visually inspect them. Many of the ones that
> are
> | > starting to leak check OK on all four tests, capacitance, ESR, DA, &
> leakage
> | > current. Should we be checking all of them on these sets?
> | >
> | > Leon.
> | >
> | > Leonard G. Caillouet
> | > Service Manager
> | > Electronics World
> | > Gainesville, FL
> | > 352-332-5608
> | > 352-332-5668 (fax)
> | >
> | > =================================
> | > Help make your TechAssist database better!
> | > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> | > =================================
> | > To UNSUBSCRIBE your email address, click here:
> | > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> | =================================
> | Help make your TechAssist database better!
> | Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> | =================================
> | To UNSUBSCRIBE your email address, click here:
> | mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> |
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
