Frank, Is the eeprom that you installed "preprogrammed"? If so you may consider ordering an unprogrammed one. If there is a trick to setting and holding the values in the programmed eproms, I don't know of it. I ran into the same problem you did and the only cure was to change distributer to one that sells the plain old eeprom Jonas ----- Original Message ----- From: "Frank Luu" <fkluu@xxxxxxxxx> To: "Tech" <techassist@xxxxxxxxxxxxx> Sent: Monday, October 08, 2001 2:12 PM Subject: [TechAssist] CTC 185. How to save info in Eprom > > Hi all: > I just replaced eprom in this TV and went into service > mode to change vertical size. after changing the new > value won't saved. Can anyone tell me how to save the > new value. > Many thanks > Frank > > > __________________________________________________ > Do You Yahoo!? > NEW from Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. > http://geocities.yahoo.com/ps/info1 > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.