John & Sharon Mikowich wrote: > Hi Everyone; > > This ctc169 ptv came in dead. found horz. out shorted. replace > horz. out & splitter. Fired up the set, started hearing this arching, > set shut down. Found hv anode button on green crt had burnt through & is > arching to gnd. Since I have never had to change one of these before on > a ptv I really am not sure how to. What I would like to know is how do I > change this or do I have to replace the complete tube ? Do I have to > separate the tube from the housing & how. then when I put back together, > what type of alignment do I have to do? also is there a part number for > the buttons. Have no manual so on my own. Any help would be appreciated !!! > > Thank You In Advance; > > John Mikowich > East Side Tv. > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > Hi Everyone: After waiting some time the customer finally gave the ok to fix this. Thanks for everyones help, the problem is the fluid leaked over the tube causing the arching. What I would like to know is what parts do I need & numbers & how do I do this, I have never had to repair a fluid leak since I do not do that muck projo. can some one guide me through this it would be extremely appreciated !!! Thank You, John Mikowich East Side tv. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/