Puhleeeeeez don't even go that route!!! Get the coolant at http://mcmelectronics.com Get the gaskets from the supplier Remove the crt and wash out the coolant chamber, leave the yoke on the crt and you won't have to do a MAJOR reconvergence, just minor adjust on the static centering rings. You don't want the coolant to get on the boards and have a customer sue you, use original parts and have the customer pay for the repair job. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Larry" <schntv@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 29, 2002 4:08 PM Subject: [TechAssist] CRT coolant?? > > What is the coolant in projection tube lens assy? > I have heard that automotive parts stores carry it. > and can I use RTV silicone sealant to seal gasket? > Thank you, > Larry > > -- > Schneider TV & Electronic Inc. > 5415 N. Wooster ave. > Dover, Ohio 44622 www.geocities.com/schntv2000/ > 330-343-0768 FCC. first class & Extra class K8WLY > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/