[TechAssist] Re: CM rotor box
- From: "Warren C." <warrenca@xxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 26 Oct 2004 00:08:31 -0400
All Three wire rotors for CM are compatible.
What I would now use is the new CM that has a remote control and a digital
memory
that the customer can store and when you put in the channel number like 09 the
rotor would rotate to the pre stored direction.
The readout is in degrees rotation from north. It's quite neat and is available
controller only if you wish.
This unit is backward compatible too to all 3 wire drive units.
HTH
Warren Campbell
Campbell's TV & Appliances
Hoyt's TV wrote:
> I have a customer who's looking for the control box for a Channel Master
> rotor Model 9512-A
>
> Russ Hoyt
> Hoyt's TV
> Exeter, NH
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
