[TechAssist] Re: CK3526R Mitsubishi
- From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 26 May 2002 08:12:13 -0500
I don't remember the cap number but it is a 'lytic next to or inside a
shield in front left corner of main board as viewed from the rear.
Jim Myers
Telrad Electronic Services Co.
Fort Wayne, IN 46815
jr.myers@xxxxxxxxxxx
260-432-4486 Fax and Voice
Fax is always on
----- Original Message -----
From: "WPT19. P" <wpt19@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, May 26, 2002 7:19 AM
Subject: [TechAssist] CK3526R Mitsubishi
Waves in colors in normal setting, reducing the color amount to minimum
then is normal, have replaced a bunch of low esr litics, I'll
appreciate your help.
Thanks in advance.
Pete
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
