Never could see any bad connections, but resoldered connections on both ic's, got video back! Thanks Peggs! Ed ----- Original Message ----- From: "peggs" <peggs@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx>; <techassist@xxxxxxxxxxxxx> Sent: Saturday, January 18, 2003 9:28 AM Subject: [TechAssist] Re: CCD-FX640 > > the location #'s on those IC's are > IC503 and IC505 > > Peggs > > At 08:56 AM 1/18/03 -0700, Ed wrote: > > > >I did solder the connector that connects the long thin pcb to the main > >board, ive had problems with that before, but it was no help. Ed > >----- Original Message ----- > >From: "peggs" <peggs@xxxxxxxxxxxxxx> > >To: <techassist@xxxxxxxxxxxxx>; <techassist@xxxxxxxxxxxxx> > >Sent: Saturday, January 18, 2003 8:38 AM > >Subject: [TechAssist] Re: CCD-FX640 > > > > > >> > >> I've repaired a few FX models, with Video problems, > >> that were all fixed by resoldering. > >> The Plugs/Connectors that inter-connect the PCBs > >> get bad connections on them,CN203 in particular. > >> Also there are 2 Postage Stamp IC's on the PCB > >> that connects to the chassis.These will get bad > >> connections as well .Using a Dental Pick and good > >> magnifier(the Camera's EVF magnifier will work) > >> work between each pin of these IC's carefully.The > >> loose pins will be obvious. > >> Start by Resoldering CN203,it connects the first > >> PCB to remove(the long thin one),that may > >> fix your problems. > >> It takes a fine point Soldering Tip and some patience > >> > >> Peggs > >> > >> At 08:28 AM 1/18/03 -0700, Ed wrote: > >> >This sony camcorder has no playback, video, and no camera video, just > >> white screen. Anyone had that problem on this model? thanks Ed Bigsby > >> > Video Pro-Tech > >> > Mesa AZ > >> >------------------------------------------ > >> >Submit A Repair Tip For Everyone Here: > >> >http://www.tech-assist.org/secure/tip/main.html > >> >------------------------------------------ > >> >To REMOVE your email address, click here: > >> > http://www.tech-assist.org/unsubb.html > >> >To CHANGE your email address, click here: > >> > http://www.techassist.net/forms/change.html > >> > > >> > > >> Peggs' Electronics > >> 1519 West 2nd Street > >> Owensboro,KY 42301 > >> 270-926-4968 > >> fax 270-686-7399 > >> ------------------------------------------ > >> Submit A Repair Tip For Everyone Here: > >> http://www.tech-assist.org/secure/tip/main.html > >> ------------------------------------------ > >> To REMOVE your email address, click here: > >> http://www.tech-assist.org/unsubb.html > >> To CHANGE your email address, click here: > >> http://www.techassist.net/forms/change.html > >> > >> > > > > > >------------------------------------------ > >Submit A Repair Tip For Everyone Here: > >http://www.tech-assist.org/secure/tip/main.html > >------------------------------------------ > >To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > >To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > > Peggs' Electronics > 1519 West 2nd Street > Owensboro,KY 42301 > 270-926-4968 > fax 270-686-7399 > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html