i would not think you can sub. i assume the polarity on the circuit may change and so you need non polorized. i have hear of using 2 caps in series, but it never worked for me. Larry albert walfield wrote: > Tom is there a kit for these? The caps are bad in it would just as well > change them all. Some of the caps are non polarized 10uf@16v SMD. Can I sub > polarized for non polarized and will it matter > which way the are install if so? > > > Any help would be appreciated > > Albert Walfield > > Since 1974 > Albert Walfield's Electronics > 28 Mulock Rd. > RR#3 > Bridgewater > Nova Scotia > CANADA > B4V 2W2 > Phone/Fax 902 543-9831 > Email : albertwalfield@xxxxxxxxxxxxxxx > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > -- Schneider TV & Electronic Inc. 5415 N. Wooster ave. Dover, Ohio 44622 www.geocities.com/schntv2000/ 330-343-0768 FCC. first class & Extra class K8WLY ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/