What doesn,t work on the TV? Do you have 130v on HOT? Does the relay click? Fuses OK? Any fusable resistors (1 ohm ) toasted ? Audio ? When you turn up the screen cntrl do you see a horizontal white line ? Does it draw any AC current from the 120v line? Will it start with reduced line voltage? Tuner problem? Let us know...............Charlie Charles Belich Slidewire Electronics 108 S. 1st. Ave KL Hibbing , MN 55746 Mailto:seashell@xxxxxxxxxx Ph: 218-263-7090 ----- Original Message ----- From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 21, 2002 1:28 AM Subject: [TechAssist] Re: BUSH 2568 NTX - any info at all? Hello, R629 ok, this is the only troubleshooting tip that I could find on this model (value is 2.2 ohms on my tv) Thanks ----- Original Message ----- From: "Charles Belich" <seashell@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 21, 2002 4:11 AM Subject: [TechAssist] Re: BUSH 2568 NTX - any info at all? > > Lack of width = R629 2r7 check solder in this area...........Charlie > > Charles Belich > Slidewire Electronics > 108 S. 1st. Ave KL > Hibbing , MN 55746 > Mailto:seashell@xxxxxxxxxx > Ph: 218-263-7090 > ----- Original Message ----- > From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, January 20, 2002 4:57 PM > Subject: [TechAssist] BUSH 2568 NTX - any info at all? > > > > Hi, anybody out there got ANY info on the tv BUSH 2568 NTX - getting info on > this tv is extrememly difficult. > All the best > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.