[TechAssist] Re: Audiovox 19" AVT-1980, chassis CN-100B dead
- From: "Peter oliver" <oliver_peter1@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 23 Apr 2004 23:35:57 +0000
The last Audiovox daewoo I had in that was in a motor home had just broken
loose the connections on the regulator, on that set they just placed their
label over the daewoo label, the original daewoo model was still on it too.
As you said it was just beat to death.
Peter Oliver
Tucson Radio TV
From: mebonnell@xxxxxxxxx (Max Bonnell)
Reply-To: techassist@xxxxxxxxxxxxx
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Audiovox 19" AVT-1980, chassis CN-100B dead
Date: Fri, 23 Apr 2004 16:48:24 -0500
I have the SAMS (3614) on that and I 801 is a STR 30130.
Sender: techassist-bounce@xxxxxxxxxxxxx From:
tjanphyl@xxxxxxxxxxxxxxx(Phil=A0Bader) Date: Fri, Apr 23, 2004, 5:24pm
(CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Audiovox
19" AVT-1980, chassis CN-100B dead, only would click, workssometimes.
Reply=A0to: techassist@xxxxxxxxxxxxx
Well, I understand from another email it really is a Daewoo model
DTQ2040FC. The STR30130 looks original. I wonder if a warranty repairman
maybe put in a 30130 which of course outputs at 130VDC instead of your
part at 110VDC. But I can't see it working like that these years. I
could "buy" a Q801 failure, or electrolytic in the PS. I tapped the
chassis and saw an arc in the picture when I tapped the relay. Bad
contacts?
Phil Bader
gulftech@xxxxxxxx wrote:
Phil,
According to Winstips, that set uses STR30110 regulator (I801). For
shutdown, says check for leaky Q801.
HTH,
Ken Smith
Gulf Technical Services
3034 Gulf Breeze Parkway
Gulf Breeze, FL 32563
850-934-8324 (Voice) 850-932-0819 (Fax)
On Fri, 23 Apr 2004 16:06:10 -0230 Eric Manuel <tvman@xxxxxxxxxxxxxxx>
writes:
Hi Phil Daewoo DTQ2040FC is the same set =A0 Eric Eric Manuel
Deer Lake Nfld
Canada
Phil Bader wrote:
This is in a motor home. Vibration issues? I carefully inspected board,
no solder problems seen. Customer
says it
will just click when power pushed. It did that here. then I pushed
several times more, once the high voltage came up, but shut down.
Sounded like HV was excessive (just a guess from past experiences),
pushed again and is working now.
Uses an STR30130 Vlt. reg.
Antone have experience with this model? Repair histories on these?
Thanks.
Phil Bader
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx
----------------------------------------------
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
_________________________________________________________________
MSN Toolbar provides one-click access to Hotmail from any Web page ? FREE
download! http://toolbar.msn.com/go/onm00200413ave/direct/01/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
