[TechAssist] Re: Audio Fisher TAD993--CD problems
- From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 5 Sep 2001 15:15:47 -0400
Thanks Jim.
I found that out..I just need help with the audio problem, now.
Thank you.
Jeff
FAX 1-413-280-0677
Jeff Dougherty
Intrepid Video & Electronics
501 Luther Rd
Harrisburg, PA 17111
717-909-8844
VCR tips, electronics info & general interest.
www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
----- Original Message -----
From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, September 05, 2001 11:08 AM
Subject: [TechAssist] Re: Audio Fisher TAD993--CD problems
>
> I had similar problems with same model after making sure the assembly and
> alignment was correct, I found that the lever on the front panel that
opens
> the cd slot door was out of place. It's a mater of holding the door and
> lever in the open position when mating the front to rest of the unit.
> Jim Myers
> jr.myers@xxxxxxxxxxx
> ----- Original Message -----
> From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
> To: "Techsonline" <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, September 04, 2001 8:38 PM
> Subject: [TechAssist] Audio Fisher TAD993--CD problems
>
>
> >
> > This unit had a few problems with dust on lens and sensors. When I press
> > STOP, CD will pull from the lens, hesitate(I hear motor running) then be
> > pulled back to the CD Lens and pulled out again, sort of like VCR
carriage
> > LED problem.
> > When I use the duster, it worked fine a few times.
> > I also had a problem with intermittent power to CD unit when I flexed
the
> > board with the big transformer. Resoldered the board took care of that
> > problem.
> > Main problem now is no audio from the CD player. After the solder job,
the
> > audio came back for a few seconds, then went out. This was the only time
I
> > had audio from the CD player. If I press tuner or cassette, I get audio
> just
> > fine.
> > Whoa! I hope someone can help with this complex problem, as I do not do
> much
> > audio, but this is for a regular customer. Why did the audio work, right
> > after I did the solder job on the main transformer?
> > I would appreciate any comments.
> > Thank you.
> >
> > Jeff
> >
> > FAX 1-413-280-0677
> > Jeff Dougherty
> > Intrepid Video & Electronics
> > 501 Luther Rd
> > Harrisburg, PA 17111
> > 717-909-8844
> > VCR tips, electronics info & general interest.
> > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> >
> >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
