[TechAssist] Re: Archives

  • From: "Bill S" <billans@xxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 17 Jan 2002 18:27:16 -0800

Cute,  altho thinking upon this now and seeing what went on with this.. What
did come first... The diode shorting or the cap shorting?   The cap is rated
at 250 volts should a 400 volter be used.....


Bill S
New Life Video & Audio
May God richly Bless you and your families
----- Original Message -----
From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, January 17, 2002 2:57 PM
Subject: [TechAssist] Re: Archives


> To be honest, I don't know if it's in the archives or not.  At a risk of
sounding stupid I was on the site a couple nights ago trying to learn how to
get the archives feature to work for myself. I've just had a couple of CTC
177 chassis in the last three months that had  identical problems.  And I
should have spent a little more time with my post to tell you, that usually
on that chassis the pos number for CR4403 is tucked-up under the part and
hard to see.  To make matters even worse, on a CTC 187 the designers thought
it a better idea to put an insulation tape around that cap and hide the pos
number all together.  But I was in between service calls and still laughing
so hard at Al's doll posting and the responses that I got short for time..
My call was out to troubleshoot the timing circuit in a chicken incubator.
I drew the line when the customer wanted to pay me in chickens...
> Bill
> Premium Technologies
> Ocean Park, Washington
>
>
>   ----- Original Message -----
>   From: Bill S
>   To: techassist@xxxxxxxxxxxxx
>   Sent: Thursday, January 17, 2002 5:12 PM
>   Subject: [TechAssist] Re: Archives
>
>
>
>   Thankyou,,, That took care of the problem!!!  Is this fix in the
>   archives/tip????
>   I will put it in if its not in and if I can figure out how to do so.
>   Thanks
>
>   Bill S
>   New Life Video & Audio
>   May God richly Bless you and your families
>   ----- Original Message -----
>   From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
>   To: <techassist@xxxxxxxxxxxxx>
>   Sent: Thursday, January 17, 2002 1:35 PM
>   Subject: [TechAssist] Re: Archives
>
>
>   > Bill,
>   > Take a look at CR4403 and C4407...
>   > Hope it helps...
>   > Bill
>   > Premium Technologies
>   > Ocean Park, Washington
>   >   ----- Original Message -----
>   >   From: Bill S
>   >   To: techassist@xxxxxxxxxxxxx
>   >   Sent: Thursday, January 17, 2002 4:32 PM
>   >   Subject: [TechAssist] Archives
>   >
>   >
>   >
>   >   Hi all,
>   >   With all the "fixitforyou" comments spreading around like wildfire,
I am
>   >   almost hesitant to ask this.
>   >
>   >   I have a RCA CTC 177 with too much width.  I wanted to search the
>   archives
>   >   and past posts and when I put in the required fields such as CTC
177.  I
>   got
>   >   all the posts that started with CTC and none with 177.  So I tried
>   >   manipulating the wording and still not having much success.
>   >
>   >   I know I have seen this problem and with what I have found on the
>   standup
>   >   pincushion board does not seem to make a whole lot of sense.  Soooo
I
>   >   thought I would do some digging and looking and am trying to this
>   archive
>   >   thingy work.
>   >
>   >   Thanks
>   >   Bill S
>   >   New Life Video & Audio
>   >   May God richly Bless you and your families
>   >
>   >
>   >
>   >   ------------------------------------------
>   >   Make your TechAssist database better!
>   >   Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>   >   ------------------------------------------
>   >   To UNSUBSCRIBE your email address, click here:
>   >   mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>   >   Or send a BLANK email with unsubscribe in the
>   >   SUBJECT field to the address above.
>   >
>   > ------------------------------------------
>   > Make your TechAssist database better!
>   > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>   > ------------------------------------------
>   > To UNSUBSCRIBE your email address, click here:
>   > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>   > Or send a BLANK email with unsubscribe in the
>   > SUBJECT field to the address above.
>   >
>   >
>
>
>
>   ------------------------------------------
>   Make your TechAssist database better!
>   Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>   ------------------------------------------
>   To UNSUBSCRIBE your email address, click here:
>   mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>   Or send a BLANK email with unsubscribe in the
>   SUBJECT field to the address above.
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>



------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: