[TechAssist] Re: Advice needed 3 volt zener leaky????
- From: Gary McCartney <gary@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 19 Dec 2005 12:05:20 -0500
It should measure like any other zener diode. I have used 3.3V zeners in
that place with no problem.
Gary McCartney
McCartney Electronics
Guelph Ontario Canada
Est. 1984
email: gary (at) number63.ca
Eric Manuel wrote:
> Hi am I supposed to get reverse leakage on this diode I am getting 100 k
> on it and also 2 more new diodes .On a 10 volt zener I dont get any
> back reading.Is this normal on a 3 volt diode.This diode is in a ctc169
> direct view diode# CR4122--rca#200158.anyone have one they can measure
> the forward and back to check it for me,,Thanks Eric
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
