I'm not familiar with the procedure for doing that Andrew. Can you guide me? Hollis Bates, Field Engineer-retired, Lewiston, Maine, HSWAD@xxxxxxx In a message dated 12/10/03 3:10:04 PM Eastern Standard Time, badandy2@xxxxxxxxxxxxx writes: try jumping out pip board to see if your problem is on pip board Andrew rose action TV ----- Original Message ----- From: <HSWAD@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, December 09, 2003 7:47 PM Subject: [TechAssist] Adjust Mitsubishi PIP > I have a model Mitsubishi Model CS27TX1 the usual PIP repair by replacing > C7001, C7014, C7026, and C7035 as suggested by a nice gentleman on Techassist. I > now have normal video and sound. The PIP however is slightly out of sync, > Height of the pip picture looks a bout normal but the width of the PIP picture > covers the whole width of the TV screen horizontally. Any suggestion? TIA > > Hollis Bates,Field Engineer-retired, Lewiston, Maine,HSWAD@xxxxxxx > > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/