Go to www.actiontvusa.com. They will sell circuit diagrams seperately from the service manuals. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 mailto:greentron@xxxxxxx ----- Original Message ----- From: "D Thunhurst" <dthunhurst@xxxxxxx> To: "TechAssist" <TechAssist@xxxxxxxxxxxxx> Sent: Wednesday, January 29, 2003 8:41 AM Subject: [TechAssist] Action TV/VCR, M#ACN-5930, won't turn on > > Hi, > One day I had the king Midas touch in reverse (you know.. everything you > touch turns to crap). > I have a 9" AC/DC Action TV/VCR, model ACN-5930, mfg. in 91 with a UL 6J71 > which doesn't show up anywhere (probably not a good number). It came in for > belt problems. When I went to re-connect the power supply that is mounted > in the back cover, I reversed two of the connectors. At turn on, the 12v > and the 6v regulators blew their faces off. After replacing them, the tv > will not turn on and the front LED shows standby. The deck operates as far > as I can tell. > I haven't found any other defective parts and the power supply seems to be > live. > Does anyone have any information on this mutt? A scan of the power supply > and micro circuits would be very helpful. > I can handle large downloads. > Thanks, > Daryl > Daryl's TV > 3310 Dyer St. > El Paso, TX 79930 > 915-565-9184 > 915-564-1024 Fax > dthunhurst@xxxxxxx > http://dynacomp.freeyellow.com > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html